SVC-2 Voltammetry cell

Standard Voltammetry Cell


SVC-2 Voltammetry cell can be used for 4 modes:

  • Standard
  • 10 mm dia WE
  • Small sample
  • Low temperature

Each voltammetry cell has its specific feature. Also can apply as an oxygen-free voltammetry cell.
Setting the sample holder of 9.0 mm of the diameter , it enables small sample measurement (100 - 200 uL).

  • For various types of electrodes
  • Sample volume from 5 to 10 mL
  • Easy removal of the dissolved oxygen



ALS 012668

SVC-2 Voltammetry cell


Contents

ALS 001056

Sample vial (20 ml) 7 pcs

ALS 012670

Teflon cap for SVC-2

ALS 002222

Platinum counter electrode 5.7 cm

ALS 010537

Purge tube (ETFE),  30 cm

  • Working electrode and reference electrode are sold separately.
  • Each component could be purchased separately:
    • 001056 Sample vial (20 mL) (10 pcs)
    • 010537 Purge tube (ETFE) (1 m)


ALS 012961

Platinum counter electrode 23 cm

ALS 012963

Nickel counter electrode 23 cm

ALS 012962
Gold counter electrode 23 cm
ALS 012189
O-ring for SVC-3 (10 pcs)
ALS 012177
Sample holder dia 9 mm (2 pcs)
ALS 001209
Cell holder for 20 mL vial


4 application modes


Set the Teflon cap adaptor to the Teflon cap.
The Teflon cap adaptor is fixed with a silicon O-ring　to work in an oxygen-free condiction.
If you do not need the oxygen-free condiction, then the silicon O-ring can be taken out from the Teflon cap.

Standard mode fits:

  • Working electrode (until OD: 6.0 mm)
  • Reference electrode
  • Platinum counter electrode 5.7 cm
  • Purging tube


Take out the Teflon cap adaptor from the Teflon cap. 
Working electrode can be fitted directly to the Teflon cap.
The O-ring will fit perfectly. It permits to have the oxygen-free condition.

10 mm WE mode fits:

  • Working electrode (OD: 10.0 mm)
  • Reference electrode
  • Platinum counter electrode 5.7 cm
  • Purging tube


Take out the Teflon cap adaptor from the Teflon cap, and set the Sample holder of the 9.0 mm of the diameter (optional item).
Set the working electrode and counter electrode into the Sample holder.

Small sample mode fits:

  • Sample holder (OD: 9.0 mm)
    • Working electrode
    • Counter electrode
    • Reference electrode
    • Purging tube

Do not work in a oxygen-free condition.


Take out the Teflon cap adaptor, and set the Sample holder of the 9.0 mm diameter (optional item).
Set the reference electrode into the sample holder.

Low temperature mode fits:

  • Sample holder (OD: 9.0 mm)
    • Reference electrode
  • Platinum counter electrode 5.7 cm
  • Micro electrode
  • Purging tube

Back to Voltammetry Cells