CompreFrame
Spring-loaded 30 kN pressure frame
The CompreFrame is a cell stand for all types of CompreCells (CompreCell 6/12, CompreCell 12 DP and CompreCell Pouch) enabling manual pressure application to solid electrolyte powders, pellets, all-solid-state batteries (ASSB), and pouch cells.
A display unit always shows the current force values (stand-alone operation possible), but stack pressure and sample temperature can be recorded and monitored using the CompreDriveControl software.
The CompreFrame offers automated temperature control, if used with the optional H- or HC Add-On.
Different spring assemblies and pressure sensors are available for best accuracy.
Typical Applications:
- Pressure dependent and temperature dependent measurements of pelletized or powder-like solid electrolytes to determine the conductivity
- Stripping/plating experiments of solid electrolyte pellets sandwiched between two Li metal electrodes at well-defined pressures and temperatures
- Cycling of all-solid-state batteries at well-defined stack-pressures and sample temperatures
Compatible samples | CompreCell 6/12, CompreCell DP, CompreCell Pouch 10S HC with adaptor |
Maximum Force / Pressure | 30 kN / 265 MPa (12 mm), 1 GPa (6 mm) |
Force sensors available | 100 kN / 10 kN / 2 kN (0.1 % linearity) |
Cell temperature limits | -40 °C to 250 °C |
Compatible temperature options | HC-Add-On: -30 °C to 230 °C |
Dimensions and weigth | 19x19x44/52 cm (cup/coil spring) ca. 16 kg |
Torque needed for 20 / 30 kN | 35 Nm / 50 Nm |
Force needed for 20 / 30 kN at lever | 90 N / 130 N |
Monitoring and control software | CompreDriveControl |
